Plaster Orgonite

Forums Technique Forum Josh Plaster Orgonite

Viewing 10 posts - 1 through 10 (of 24 total)
  • Author
    Posts
  • #158
    AvatarEK
    Keymaster

    Plaster orgonite

    Postby josh on Sat May 29, 2010 4:03 pm

    I thought it would be a good thing to start a new thread with the plaster, it may grow out the welcome post.
    Anyone desiring to look at the beginning of the plaster may go to the welcome thread.Today, I ran some experiments with what I call the Orgonite plus (some of you have pendants made of it) versus a same shape pendant made with plaster, crushed crystals and a pinch of copper powder, (for real may be half of 1/8 of a teaspoon), I wanted same size and shape to make an honest comparison.
    The people doing the testing were 6 women, all of them healers, energy workers, massage therapists two homeopathic doctors.
    They did not get to look at the devices, these were put in each hand and the question to them was: “what do you feel from one versus the other as far as life energy”.
    I did this without having the ladies communicating between each other, so they did not hear any of the comments that was made.
    All of them felt the resin Orgonite within a few seconds as an electrical energy, some said strong energy.
    After a few more seconds, there was a raising of the eye brows and a new awareness coming to consciousness: they started feeling the plaster: ” higher vibrations, in tune with the 4 upper chakras, open like a sun and vibrate in all directions”
    The resin Orgonite was more in tune with the 3 lower chakras, a much more grounding sensation.
    The power coming out of both were strong , initially the resin made itself known first, but in a very short time they had difficulty choosing one or the other (two chose the plaster though) and the final choice was based on individual need of grounding or desiring more energy or a connection with the subtle energy of the pendant.
    All of those beautiful ladies were gathered for an Native American Ceremony.
    So here we are, two different compounds, two different energies, one strong upfront, the other needing to be ” discovered” and both extremely valid as energetic,life energy devices.
    If you haven’ t gone on the link I gave you to learn more about the plaster devices, please do so, make your own, it is very simple and we can share more about it on this forum.
    Josh

    Re: Plaster orgonite

    Postby josh on Sat May 29, 2010 4:27 pm

    Here is the link:
    http://babelfish.yahoo.com/translate_ur … =Translate
    This is the original site : http://www.energiekegel.de/
    Between what we have been told in our home, and this latest experiment, my lady and I feel (and she has been pushing for the plaster :roll: ) that this “plasterite” might be the next generation of devices more in tune with the new higher energies.
    The cost is minimal, and it can be a whole safe and fun family project.
    And ,with dowsing, we have discovered that there is no need to crush the crystals, that tumbled stones are plenty good, but they should be as small as possible ( as for making jewelry.
    Have fun
    Josh

    Re: Plaster orgonite

    Postby josh on Sun May 30, 2010 9:26 am

    Also since we can affect the grid and obtain a better looking sky by wrapping a electric cord around the device, we no longer have to put them outside, we can do it from the comfort of our living room, having a cup of hot chocolate
    Josh

    Re: Plaster orgonite

    Postby nepipemi on Sun May 30, 2010 10:23 am

    There has been a question raised about the “plasterite” being a collector instead of a transmuter of DOR.
    Just a few days ago, I read that “after they recieved a tip”, someone smashed a plaster piece they had bought a while ago because he said it was a scam or something like that. I don’t know where he got the “tip”.
    Do you have any info that could shed light on this subject? The plaster would be way cool, cheap and easy to make but it seems that it is getting a bad rap. Does it indeed transmute or just a DOR collector?
    Nepi

    Re: Plaster orgonite

    Postby josh on Sun May 30, 2010 11:35 am

    Nepi I have had plaster Orgonite in my home as well as other families that I have made pieces for, if there was any collecting of DOR from those pieces I would have been told since I see those folks all the time and they are quite sensitive energy wise.
    Another factor in the shooting down of the plaster is also the amount of business a whole lot of people would be loosing, the plaster means “self reliance”
    , it means all of us can do it, the children can have fun with it an create new combination, powerful combination that we have not thought of and the kids are not allowed to have because they are too young to play with a dangerous substance such as the resin and the sharp metal shavings.
    There no mystery about the plaster it is simple to make and to obtain.
    Make a broadcaster with plaster and “bless” the grid and see how it feel, see how much blue sky you are able to have :D
    Good luck

    Re: Plaster orgonite

    Postby nepipemi on Sun May 30, 2010 12:32 pm

    Thanks Josh, Ok, then, how do you make it so that I can try it for myself? Do I just the plaster from the craft store? Should there be metal in it, and if so, how much? How many crystals?
    THanks!
    nepi

    Re: Plaster orgonite

    Postby josh on Sun May 30, 2010 12:59 pm

    Nepi get the regular plaster of Paris from Lows or Home Depot, get the stones from a bead store, it is good if they are small like the kind you would use on a bracelet , make the plaster with a little more water than the called for proportion (2 plaster and 1 water) put 1/3 of the plaster in the mold, put in some stones, another third, a bit more stones, and the rest with all the stones left.
    Use in it a little oxides that you have, chromium oxides, copper powder, or copper sulfate, the copper powder After a week of the plaster drying, you can paint it with some shellac at that point your device will be turning a wonderful shade of light green.
    More to come
    Josh

    Re: Plaster orgonite

    Postby nepipemi on Sun May 30, 2010 1:14 pm

    Thank you for those instructions.
    I’ve been pondering it still and wondering if plaster is gypsum and selenite is gypsum, and sheet rock is gypsum, then how is the plaster orgonite any more effective than say a piece of drywall/sheet rock or a chunk of selenite? Please don’t ban me from the forum :o :lol: :D , I’m just trying to understand how it works. :D
    nepi

    Re: Plaster orgonite

    Postby josh on Sun May 30, 2010 3:52 pm

    I am reading from the plaster bag: calcium sulfate hemihydrate
    : calcium carbonate
    :crystalline silica
    Thats it :D
    Josh

    Re: Plaster orgonite

    Postby josh on Sun May 30, 2010 7:09 pm

    As far as how it work, it is still a mystery to me, if you go on site of this German man: http://www.energiekegel.de/ maybe you can make sense of the language, it may have to do with the power of the full color spectrum on the molecular level, so this is what I know: I saw it, I liked it, I did it….and it worked.
    Now for sure it does not work in the same way as the resin Orgonite, I feel strongly this is the next level up, and because of the testimonies of those ladies yesterday, I know I am correct.
    The simplicity of those devices makes it most attractive………………..not good to put in water though :cry: , for that we must stick to the resin.
    Yes I think it must be like sheet rock, unless it is a different composition for dry wall, I remember someone saying that plaster was selenite?
    Josh
    #159
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby Atma on Sun May 30, 2010 7:18 pm

    This has interested me since I saw it posted on warriormatrix. I will give it a go soon to test it out myself. So does the plaster create pressure when cured on the crystals?? Guess HTML does’nt work here… how do we post pics Josh? Is it possible??
    >
    Atma

    Re: Plaster orgonite

    Postby josh on Sun May 30, 2010 8:37 pm

    Yes it is possible, being a brand new site we are still polishing everything, I am going to see the web person on Tuesday and hopefully that picture problem should be resolve.
    As far as the pressure on the crystals, this piezoelectric effect is getting too much press, and I feel that it is way over rated, the way Orgonite work is this;
    It work just like a condenser: 2 pieces of metals with insulation in between, apply a charge, electrons get stuck/stored in between the metal within the insulator, in the condenser the metal is continuous and can be wired to receive and discharge, in the Orgonite the metal are totally self powered, receiving their charges from any EMFs in the surrendering area and sending back this EMF transformed into QI or life energy.
    The metals in the condensers are a long strip, in the Orgonite they are small independent particles
    The insulator in the condensers are a long strip of insulating material, in the Orgonite it is the resin that is acting as insulation
    The crystals focus and amplifyIn the plaster, the jury is still out, with the little that I know I do not see how it work, but I must submit to the overwhelming results: it work!!
    As with other devises, I have found that we can produce this life energy without the metal and without the resin.
    Good luck with your experiments
    Josh
    josh

    Re: Plaster orgonite

    Postby Gifter on Wed Jun 02, 2010 8:49 am

    Hi Josh
    Wanted to try the plaster ,went to the hardware store ,4 lbs for $6.99 gosh that was high priced. Tried Wally World ,8 lbs for $5.88 now that was more like it.
    Anyway was excited to get something made. Read the mixing ratio’s, come up with this is simple 1 water 2 plaster. Came up with the amount I needed and started mixing up a batch.
    To make a long story short ,when I came up with the pancake type thickness I was ready to pour, went to pour and it was already thickened up where it wouldn’t pour so I added a little water to thin it out , and more water,and more water and still had to spoon it out into the mold , moved it around in the mold even adding more water to get it thin enough to add what I wanted into the matrix.
    I made 3 different pours and my results were the same. Is their some secret on how to mix this stuff up without it going nuts on me???
    I poured this Sunday afternoon and its still mushy ,looks like in a couple more days it might be ready to take out of the molds, if it hardens at all??
    Need some pointers on how to mix this plaster stuff ??
    For whatever its worth, I asked a very gifted person about the use of the plaster, answer was Great . The Gemstones,coils,crystals or whatever you put into the mix is what makes it work. That is why just plain wall board isn’t a generator of energy by itself. And yes plaster is just selenite .Gifter

    Re: Plaster orgonite

    Postby josh on Wed Jun 02, 2010 9:05 am

    OK Gifter, what I have found with the plaster is that you must be fast, and I always add a little more water then what is called for, if the mix require one quart of water I will add one cup extra.
    Mix it quickly, put it in the mold, halfway put some stones, pour the rest and add the rest of the stones. Do not wait, as soon as it is mix: pour it; I have had plenty of false start myself :? AS a rule it seems to harden within 10 to 20 minutes, and there is also a bit of heat generated, but not that much.
    I get my plaster from one of the two Home Depot or Lows, and I am paying $27 for 25 lb, I am certain that if I go to a construction supplier I will find it in 50lb bags for not much at all.
    josh

    Re: Plaster orgonite

    Postby Gifter on Wed Jun 02, 2010 9:15 am

    Thanks Josh
    Will be much faster than before. So 8 lbs for $5.88 is a cheap price ( 24 lbs would be $17.64)( 32 lbs be $23.52).
    So will what I made already,will it harden or is it all hopeless??
    Thanks Again
    Gifter

    Re: Plaster orgonite

    Postby josh on Wed Jun 02, 2010 9:47 am

    No not hopeless, if you have put your stones in it, you can take your failed plaster and put it in a bucket of water, it will dissolve and you can salvage your stones, Yes you found a good price, I will look around for larger quantities, and see, but so fare you did good at wally mart
    josh

    Re: Plaster orgonite

    Postby josh on Wed Jun 02, 2010 9:56 am

    I just found this on line:
    http://www.idealtruevalue.com/servlet/the-38762/Detail
    50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.
    50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.
    SKU: 830299
    Model 162640-RDC06
    UPC 0
    50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.
    This item normally ships in 5-8 days
    U S GYPSUM
    Quantity On Hand: 19
    PRICE: $7.25
    Buy With Confidence. Our checkout is secured with SSL. No one ever sees your credit card information.
    Quantity:
    E-mail a friend about this item.
    Return to Cat
    I Think there may be some hardware stores around here that would have that, $ 7.25 for 50 lb wow :o :o

    Re: Plaster orgonite

    Postby nepipemi on Wed Jun 02, 2010 10:23 am

    What is the difference between plaster of Paris and interior finish plaster?
    nepipemi

    Re: Plaster orgonite

    Postby josh on Wed Jun 02, 2010 11:18 am

    I think one may be finer than the other but I shall enquirer…………….I called the White House…. they had no idea :roll:
    j

    Re: Plaster orgonite

    Postby josh on Wed Jun 02, 2010 11:39 am

    #160
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby monsoon gecko on Sat Jun 05, 2010 10:14 pm

    Yo Josh….what a buzz. ! A new technique that works…in fact PUMPS. !
    Got plastered and made 3 Hhg’s yesterday.
    One in s/steel pyramid, large glass martini and cylinder plastic takeaway away container.
    It was quite a wet mix…crystals sank to bottom…even thought it wouldn’t harden…..poured
    off half cm of water that accumulated on top of moulds during hardening.
    Sprayed silicon release in the pyramid and martini…all came out smoothly.Poured into another
    glass and a ceramic bowl with no release agent <and no crystals ><made too much plaster > and
    they came out perfectly too. <will make great pavement chalk at school Ha. >The important thing here is , I can use all of my normal moulds safely…glass, silicone and s/steel !
    Even the giant glass vase for a plaster Broadcaster.!
    I must share with you my energy sensitivity…Right fom the very first Tb;s , I could feel the orgone
    field. My best desciption is like a spiritual pressure to my forehead…third eye ?
    I have made many devices since and each new one takes some getting used too. eg. Cb’s ,standard
    and induction type..114 and underground cloud buster UCB , peacemaker PM. The last 3, I discovered on
    Etheric Research Forum. I couldn’t go near the 114 for a couple of days….even brought first helicopter. !
    Next was the Broadcaster and now Plaster Orgonite…I can’t believe the energy given off by these
    plaster Hhg’s….very powerful orgone field…and I can make them anywhere ,anytime.
    monsoon gecko

    Re: Plaster orgonite

    Postby monsoon gecko on Sat Jun 05, 2010 10:44 pm

    continued..
    I used quite a few crystals and minerals…most from previous ebay purchases., mainly strung chip beads.
    The list includes : lapis lazuli. sodalite, tourmaline, kyanite, ruby chips, mica flakes, tiger eye, amethyst,
    rose quartz .garnet, sugalite, hematite, forrest agate, and turquoise. Also , included was a chunky 1 inch +
    smokey lemurian quartz point.
    I have spent half a day hammering the rest of my stones.< of course I’ve Kept a few. >. This is for two reasons.
    1. Apparently. smaller pieces and powdered work better . so now largest broken pieces 5mm.
    2. I’ll be making Hhg’s with school students this week in my favourite teacup size glass moulds..actually old punchbowl set !
    I want to preserve my resources. I know what kids are like…they’ll want to use more than is necessary. so this way they are limited to a pinch or two of each sample…..unbelieveable…I’m actually looking forward to going to work..Ha ha ha .
    Well the spiritual pressure is still there today, though not as intense…guess I’m getting used to this strong new orgone field ! !
    Thankyou Josh for sharing this new technique……OUTSTANDING !
    monsoon gecko

    Re: Plaster orgonite

    Postby monsoon gecko on Sat Jun 05, 2010 10:48 pm

    Oh , forgot to use copper powder…must remember to take to school….even stronger ? Ha..should be interesting !
    monsoon gecko

    Re: Plaster orgonite

    Postby josh on Sun Jun 06, 2010 6:37 am

    Thank you Monsoon, this is a wonderful report, it will be interesting to see what the children will do, let us hope many people pick up on the idea of making cheap, easy and powerful Orgonite :D :D :D :D
    josh

    Re: Plaster orgonite

    Postby josh on Sun Jun 06, 2010 7:01 am

    I am getting ready to make a cloud booster using a single 4 inch copper pipe in the middle, I will have to keep it under cover, though shellac woks nice on the plaster, I dont think it will work for too long in the elements
    J

    Re: Plaster orgonite

    Postby nepipemi on Sun Jun 06, 2010 1:34 pm

    Oh god, this is awesome, MG! Thanks for the write up.
    Regarding your sensitivity, have you ever made or been around sugar orgonite? What does it feel like comparatively?
    Also, Josh, I know might defeat a couple purposes of the plaster method, but what about coating the outside of the plaster CB with resin or epoxy to weatherproof it?
    Nepi

    Re: Plaster orgonite

    Postby josh on Sun Jun 06, 2010 4:20 pm

    I shall try a coat of epoxy and see what happen
    j

    Re: Plaster orgonite

    Postby monsoon gecko on Sun Jun 06, 2010 7:02 pm

    Hi Nepipemi…Never considered sugar orgonite,,,have read about it couple of times ,but info wasn’t clear,
    on construction and methods….closest I’ve been was munching on a toffee apple ! Ha haI have some brown and black oxides buried away somewhere from old pottery days…..these were used to paint,
    colour, patterns on unfired pottery pieces….I’ll take to school so kids can decorate there plaster Hhg’s…should
    look great and add their own personal touch.
    Shellac….natural substance ? From memory I used this to French polish a wooden jewelery box at school. Came out with glass
    finish..got an A…but that was 40 odd years ago. Is this the stuff that comes in flakes and you dissolve with something ?
    Can,t remember . How many coats? Also , how long after making does plaster take to be dry enough to shellac ?
    The paper my Hhg’s are sitting on still seems damp. I have 2 days with students so looks like not enough time to dry,
    paint and shellac .
    More info appreciated… Thanks
    monsoon gecko

    Re: Plaster orgonite

    Postby josh on Sun Jun 06, 2010 8:36 pm

    Hello MG
    The shellac drys in a minute, the first coat will disappear quickly in the dried plaster, and to see the shine you will have to coat it about thee times.The shellac is natural, it is made with bugs :o , I like it since it dry so fast, it will come in different weight, called 30 lb or 40 lb cut, and this has to do with the amount of dissolved bug material in a solvent, I have not seen it in powder form to be dissolved, all I can get is the already prepared mixture.
    So You should be able to get the children to use it, also if it is hot where you are, by the time you finish the second side of your HHG, the first one will be dry, so basically you can shellac the whole device and keep on going for a second coat without stoping.
    I am most interested in what the children will say :D :D :D
    IMPORTANT: after you use brushes with shellac, it will clean spotless with ammonia, even if you forget a brush and do it the day after
    josh

    Re: Plaster orgonite

    Postby josh on Sun Jun 06, 2010 8:57 pm

    Forgot; depending on the size of your plaster pieces the drying time will vary , some of the larger one : cone 8 inches in bottom 3 inches at the top and 18 inches tall will take a week to dry before shellac, an HHG may take a day or two depending how hot the environement. this may be the only draw back with the plaster, you can demold them rather quickly (much quicker than resin), but it will stay moist for a while, but the results in the quality of the energies is worth the wait :o :o
    #161
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby monsoon gecko on Tue Jun 08, 2010 7:59 am

    Thanks for info Josh,
    Picked up some orange shellac flakes and mineral turpentine < I think..left at school >..has
    instructions,,,will find out tomorrow.Today was great. Students responsive. They are quite energy sensitive having played with
    quartz, tourmaline and shiva stones etc….can operate pendulum and divine water…I gifted them
    pocket orgonites last Christmas.
    So we’re going to make plaster orgonite today……eyes lit up . ha
    .ground rules set , each student collected 3 pieces each
    of 19 samples in takeaway containers , plus a small hermiker quartz.
    The Hhg moulds are teacup size ,old solid glass…a couple of old punchbowl sets.
    The extras from previous list were : shungite, adventurine, quartz chips , red coral and
    I remembered the copper powder..each batch of plaster had t/spoon .
    So after a demo, students made and mainly poured their own in groups of 4. Had to help
    couple of times…..They came out very smooth and students reported feeling energy while holding.
    Painting tomorrow…Should be interesting.. might try some diff, moulds.
    S
    Don’t think will be dry enough to shellac,..we’ll see.
    monsoon gecko

    Re: Plaster orgonite

    Postby monsoon gecko on Wed Jun 09, 2010 7:49 pm

    So.. arrive at school next day..staff seem happy as usual,
    but noted higher energy…the students were zooming around
    playing happily together….not your normal layed back, slow
    start morning !
    Class work surprised me as All students participated with
    enthusiasm. The day flew past and they went home smiling and
    chatting…. WOW..impressive.
    This was a real eye opener…..the school is already well gifted
    with Tb’s in classrooms, office and buried in gardens…..but
    today there was a much higher energy factor that stood out.The PlasterOrgonite was still damp a day later,,we played with
    them for a while…most confirmed feeling energy while held..
    couple didn’t.. I demonstrated oxide painting…tricky and fiddley.
    No room for error as oxide soaked in straight away and smudged
    on touch….the shellac flakes refused to dissolve. metho, not turps..!
    So we made more plaster orgonite.! ! ha ha
    In fact, I really wanted to trial my silicone moulds…trays of flat top
    pyramids, hearts and stars.Tb size. Students loved collecting the samples
    again and proficiantly made and poured the plaster with the small
    amount of copper powder.
    They came out beautifully….smooth as..with a hint of coloured
    minerals showing through.
    So school holidays coming up.. won’t see them till next term.
    I wonder if their homes will glow as much as the school did ?
    Next trial…a large Plaster Broadcaster…..no bucket of water.!
    Enjoy.
    monsoon gecko

    Re: Plaster orgonite

    Postby monsoon gecko on Fri Jun 11, 2010 2:36 am

    Here,s some photos…..if they come out !!
    http://s814.photobucket.com/albums/zz63 … %20Trials/
    monsoon gecko

    Re: Plaster orgonite

    Postby josh on Fri Jun 11, 2010 9:51 am

    Hey MG, this is good, how do you manage teaching about Orgonite in a school, I thought for sure this would never be allowed, this is wonderful indeed, those kids will never forget.
    I wanted to share something here for experiment: On a long extension cord, put and wrap a device at the beginning of the electric cord and 10 or 15 feet further do the same,
    So you will have on the same cord TWO devices 10 to 15 feet ( 3 1/2 to 4 meters) apart, I have been doing that and I think it is more effective in broadcasting.
    Plaster or resin no matermale plug_________X__________________________________X__________female side
    ——————– device———–10/15 feet—————–device
    This is the one-two punch :D
    Josh

    Re: Plaster orgonite

    Postby nepipemi on Fri Jun 11, 2010 10:07 am

    Josh,
    next you will be wanting us to make a flexible rubber orgonite paint to coat the entirety of the electric cord!Hey, wait a minute! :idea: :shock:
    Does silicone qualify as a chemically organic substance?

    Re: Plaster orgonite

    Postby josh on Fri Jun 11, 2010 2:49 pm

    Hummmmm, now that you mention it……

    Re: Plaster orgonite

    Postby monsoon gecko on Sat Jun 12, 2010 10:40 pm

    Plaster Orgonite Broadcaster
    Here.s my photobucket essay….Enjoy
    Oh…do I need as much quartz as in resin model ?
    My guess is……can’t hurt…especially considering this size.
    Comments appreciated.
    http://s814.photobucket.com/albums/zz63 … r%20Trial/
    monsoon gecko

    Re: Plaster orgonite

    Postby josh on Mon Jun 14, 2010 2:38 pm

    MG I think you need as much ‘crystal powder’ for the plaster, I know That is what I do and it seems to work well.
    Here a few more pictures
    Here is ‘cake’ :D
    Image
    Here is a large cone HHG
    Image
    Image
    Here is the table center piece, two cake model
    Image
    Image
    More coming soon
    j

    Re: Plaster orgonite

    Postby josh on Wed Jun 16, 2010 9:28 pm

    Alright people, this is the translated link from the German to English, about the gentleman making Plaster “orgonite”
    http://babelfish.yahoo.com/translate_ur … =Translate

    Re: Plaster orgonite

    Postby Spirit Walker on Sat Jun 19, 2010 11:51 pm

    Aho Brother Josh!! Thank you for guiding me to this new matrix for the creation of energy toys! After viewing the German website, I instantly fell in love with the energy they were producing.
    Today after running around with kids, I finally checked sources for plaster, found my Home Depot had a 20lb bag for 16 bucks, so bought that a some shellac to finish with when dried. I think I messed up on the first one, the glass I used appeared to be cylindrical, but now I’m thinking the lip slightly curves in, so will see soon! LOL Worse case I brake this glass to get it out. I did spray and smear Pam on inside of glass prior to pouring in mix.
    I made more mix than needed, so scrambled and filled a large coffee mug and finally a paper cup, 4oz I think. That last I took one of my oldest muffins and filled bottom of cup first, slide muffin in and pressed down until it surged up and over it, then filled more till ran out. :)
    I got creative on the mix itself. The plaster got mixed with some red pepper and lots of cinnamon, with a dash of garlic. Also one cap full of crushed/powder mixed crystals. Water came from charged water reservoir I have accumulated from various forms of natural water charging, and one mixed with plaster, I discovered I put too much water in… OOPS. Was way to watery. Threw in pinch of magnesium oil and stirred, added more fresh plaster and stirred, after pouring into mold and adding variety of small gems, garnet, green adventurine, and peridot, with quartz crystal (4) surrounding a cut bamboo length in middle. Added more plaster to cover top of bamboo, then added more of the above gems, then covered them with more plaster.
    I put in front of my room air cleaner that has a Himalayan Salt Crystal Lamp on top, and produces it’s own ion mix to clean the air, so as they sat in front of that, the last ingredient was a few drops to each of Nag Champa oil. Yum! :)
    They appear to all be dry, will wait till tomorrow to see about removing one. Room smells great. One in glass appears to have a mocha color to it, very nice.
    I got a lot more plaster and water out the wha zoo, so my father’s day gift will be making some with kids tomorrow afternoon. I’m going to pull out the brass heart and use that! Maybe the big dolphin for myself… :)
    Aho!
    Tony
    #162
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby josh on Sun Jun 20, 2010 10:34 am

    Thank you Tony
    This is quite a mix a look like a recipe for something to eat, it reminded me that in the early days of Orgonite Don Croft would put hot pepper in his Orgonite, so as a good follower I did as well, he may still do it for all I know.
    Yesterday I also poured three devices, one of them is a safety street cone (big red thing) and this took one 25 lb bags, and also two very beautiful large and tall glass vases, both of them were filled with cracks within minutes of filling with the Plaster, I do not know why, may be very cheap glass, anyway both also took one 25 lb bags, I de molded the rubber cone late last night, and I will do the glass in the next hour
    I shall take pictures and post :D :D

    Re: Plaster orgonite

    Postby josh on Sun Jun 20, 2010 7:33 pm

    Here are some new pictures of yesterday’s pouring of cones and some other older ” creations” :lol:
    The large cones are 27″ tall
    Image
    Image
    Image
    Image

    Image

    Re: Plaster orgonite

    Postby orgone donor on Mon Jun 21, 2010 5:51 am

    All the plaster pics look really great. Am going to try some plaster orgone when my crystals arrive. (also the plaster appeals more to my budget !!)
    Question: will painting the plaster piece have an effect on the energy? I was thinking they would look really cool painted with sparkly rainbow coloured paints, but if the energy is optimal without paint, I will leave them be.
    Also, do you still put in main quartz like with resin orgonite, with the positive terminated end pointing upwards?
    One more: I don’t have any copper powder yet, would it be okay to mix in some fine bronze shavings in the plaster mix instead? .
    PS. My first ever resin orgonite TBs are curing right now. the journey has begun. :D
    orgone donor

    Re: Plaster orgonite

    Postby monsoon gecko on Mon Jun 21, 2010 9:28 am

    Good one Orgone Donor….that’s excellent news, just keep making more….you’ll
    be surprised at how quickly they get used up gifting…friends , places , towers,
    swarf suppiers, lecturers….ha, ha ..etc.
    Questions,,,not sure.. I like an upright quartz in the middle, but at school, kids just
    throw in a little hermiker…still seems to work ok.
    Apparently , works without metal powder too…will leave those up to Josh to answer.Let the gifting begin….enjoy !
    monsoon gecko

    Re: Plaster orgonite Ice Test

    Postby josh on Mon Jun 21, 2010 12:45 pm

    Here are the photographic results of the Ice Test with Plasterite after 12 hours in the freezer last night as well as pictures of frozen water in control jar without Plasterite
    The ice cone formation is obvious….as well as the tip rising on top…..with the Plasterite covered jar
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    Ordinary ” landscape” of frozen water in the control jar after 12 hours in the freezer…..
    Image
    Image

    Re: Plaster orgonite

    Postby josh on Mon Jun 21, 2010 1:13 pm

    The plasterite that I make will not stay as shown my lady has already decided to paint them and have landscape pictures on them so yes paint them how ever you want, but no metallic paint.
    AS far as the metal when I use some in it is a small amount such as a pinch of copper powder for a gallon volume, but lately I have not put any to see what would happen.
    There is something of worth that was told me by Spirit Walker, if we can verify this it would show why Plasterite is working; what he said was that we probably have a gazillion microscopic air bubbles in the Plasterite, and that would translate into an infinite amount of resonant cavities :shock: :o :lol: :lol: :lol:
    That is big, we shall see, I will have to break a piece and look with a microscope, I think I have one that I can hook up to my computer, given to me by a long ago friend
    As soon as we have painted pieces I shall post them

    Re: Plaster orgonite

    Postby Spirit Walker on Fri Jun 25, 2010 10:12 am

    I’ve now got about 10 pieces made from the plaster, and OH MY GOD, I love them!!!!! :) I was handling my 1st attempt last night to check on the shellac job I did on it the night before (needs more, sucked it right into the plaster, can’t even tell there is shellac on it!), and just holding it and feeling it’s energy, I burst out giggling! LOL A very high, joyous energy is coming out of that little puppy!!! By palming (meaning using my palm as a sensor to measure the energy output), I could define a field extending almost 12 feet from it, and this piece was made in a small glass tumbler, so it is not big. The more I became sensitized to the energy, the more uplifted I felt from being inundated with it!!
    Still lots of playing to do this weekend with making more, the pieces my kids made came out fantastic as well, especially the large dolphin mold that my daughter used!!! She has some paint to decorate it as well, and is planning on many more pieces now. The blessing for me in this is that my daughter has been challenged with serious emotional issues over the last few years, and seeing her respond to the energy these creations produce is very heart warming and encouraging to me as her father. I truly believe that LOVE can manifest in a myriad of ways, and that working with these diverse elements to create/attract/broadcast Life Force Energy is a sacred and joyous undertaking.
    AHO!!
    Tony

    Re: Plaster orgonite

    Postby josh on Fri Jun 25, 2010 9:10 pm

    This Plasterite cone got the ” treatment” from my lady :D
    Image

    Re: Plaster orgonite

    Postby Steve on Fri Jun 25, 2010 10:09 pm

    Wow! That piece should be in an art gallery. Nice Work!
    Steve

    Re: Plaster orgonite

    Postby josh on Fri Jun 25, 2010 11:18 pm

    :D :D :D :D That piece is 18″ tall and sings very nicely, next come the 27″ will shall see what she will do with it, Steve this is so easy make some and see how it feel, guaranty you will like it…..and the way it broadcast :o :o :o :o :o
    josh
    #163
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby Spirit Walker on Sat Jun 26, 2010 12:17 am

    That is without a doubt, the most beautiful life force energy harmonizing art piece I have ever seen!!!! WOW!!!! Incredible, truly! I love it! Please ask the dear Lady to make many more!!!! You must go buy much more plaster and paint for her!!!! I am looking for bigger mold later this day, and will buy more plaster and paint too! That piece just sings love, peace, tranquility, and joy, in so many direct and indirect ways. I could just stare at it for hours….
    Tony

    Re: Plaster orgonite

    Postby josh on Sat Jun 26, 2010 9:20 am

    The mold come from Michael the art store, i think it was about $20
    j

    Re: Plaster orgonite

    Postby monsoon gecko on Sat Jun 26, 2010 4:49 pm

    Great piece, love the earth ,ocean ,sky balance. Great colours. Did the paint soak in like shellac
    and what sort of paint to use ? Surely you can’t wrap power cord now and cover over now !
    Very interested to know what sort of Bovis reading for a piece this size. Painted ……and wrapped
    in power cord.
    Keep ’em coming….want to see the next one ..ha
    monsoon gecko

    Re: Plaster orgonite

    Postby josh on Sat Jun 26, 2010 9:46 pm

    Hi MG, this is the ” painter” of the cone :) I used non metallic acrylic paint as well as pigments and mica in glue for shine and interesting effects…No it did not sink in the plaster but stayed on the surface. This piece is to ” sing” by itself, because of the colours….no need for an electric cord. :D We have a cone of 27″ wrapped with a long cord (20 times). It seems that colouring the pieces gives it a boost because colours have their own frequencies that add up to the plaster and whatever is in there with it.
    So if you and/or your students will paint their Plasterite pieces, see/feel what will happen :o. Have fun and I will post the other sides of that cone and other pieces soon.OK my turn… Aright Steve give us a Bovis reading, I promise I will not ban you for that :D :D :D , My lady has gotten the ‘bug’ for the Plasterite and the decorating, so today we got bunches of molds and 75 pound of plaster :roll: , I know what I will be doing tomorrow ha ha
    josh

    Re: Plaster orgonite

    Postby Steve on Sat Jun 26, 2010 9:57 pm

    I’m getting 324,000 on this one Josh. Even more important than the Bovis energy, the frequency of this one is very high. Can you feel the field of this piece reaching out? I get about 17ft or so.
    Blessings
    Steve

    Re: Plaster orgonite

    Postby josh on Sat Jun 26, 2010 10:35 pm

    Thank you Steve, when are you going to make your own :D :D
    here are the rest of the cone faces :D
    Image
    Image
    Image

    Re: Plaster orgonite

    Postby nepipemi on Sat Jun 26, 2010 10:45 pm

    :shock: holy cow! That is BEAUTIFUL! NICE, NICE, NICE!
    :D
    :D
    :D
    nepipemi

    Re: Plaster orgonite

    Postby sacred on Sat Jun 26, 2010 10:51 pm

    awesome! 8-)

    Re: Plaster orgonite

    Postby monsoon gecko on Sun Jun 27, 2010 8:19 am

    Awsome alright ! The land section I find mesmurising , great pattern of warm colours.
    Looks great from all directions….
    Wow… that Bovis reading puts it higher than a nano power wand and a bit over a CB..
    very encouraging…….. That means my large pieces must kick ass too…within reason.
    So , by adding power cord wrapping,,,say 7 or more turns , the Bovis reading would jump ?
    Correct ? Esp. with its function on the power grid ?Thanks guys for input.. Just putting 2 + 2 together,
    Bring on next one !
    monsoon gecko

    Re: Plaster orgonite

    Postby josh on Sun Jun 27, 2010 1:28 pm

    Steve can you answer MG’ s question?? This is a powered plasterite cone, the mass of which is about 3 times the painted cone….
    See what you get. Thankshttp://i986.photobucket.com/albums/ae347/Garrigues/002-1.jpg%5B/IMG
    Image
    #164
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby Steve on Sun Jun 27, 2010 2:35 pm

    Hi MG, I get about a 26% increase in power with the piece wrapped with elec cord.
    Josh I’m getting about 440,000 on that one. The main thing is these pieces are feeding the orgone back into the grid.
    Peace
    Steve
    Steve
    Posts: 33
    Joined: Tue Jun 01, 2010 1:58 pm

    Re: Plaster orgonite

    Postby josh on Sun Jun 27, 2010 2:37 pm

    Steve, my lady is asking; if she color that large piece will the energy rise significantly
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby Steve on Sun Jun 27, 2010 3:22 pm

    I’m getting that the energy stays about the same but the freq could change based on color choice.
    S
    Steve
    Posts: 33
    Joined: Tue Jun 01, 2010 1:58 pm

    Re: Plaster orgonite

    Postby monsoon gecko on Mon Jun 28, 2010 7:50 am

    Yo…Steve, this is just great information…great confirmation boost
    for experimenters….I’ll be making more plaster broadcasters…..
    that’s for sure,,, Thanks
    monsoon gecko
    Posts: 102
    Joined: Fri May 28, 2010 1:49 am

    Re: Plaster orgonite

    Postby Spirit Walker on Thu Jul 01, 2010 9:15 pm

    IMG_0001.JPG
    You do not have the required permissions to view the files attached to this post.
    Spirit Walker
    Posts: 41
    Joined: Fri May 28, 2010 9:43 pm

    Re: Plaster orgonite

    Postby MariaT on Thu Jul 01, 2010 9:22 pm

    Hi Josh… thanks for a fascinating thread. I’m a new member who found your site a couple of days ago and became enthralled by plasterite. I’ve only been making orgonite since August 2009 and although I still have lots to learn, I’m passionate about it.
    I live in Cape Town and had intended making an orgonite CB for an event scheduled for 25 July, the Golden Pyramid of Peace. However, I’m having difficulty in finding DT crystals of the correct size. A trip to my normal supplier a few days ago proved to be unsuccessful, as did enquiries from other local suppliers.
    I’ve now decided to make a plasterite cone instead for the event! Thanks to you.
    So yesterday I collected plaster of paris and some oxide. Can’t find copper powder yet in small quantities (I was quoted R666 – about $88 – for 1kg!!). Is it OK to use copper sulphate instead? I’ve decided to use my newly acquired stainless steel pyramid mould which I’ve only used twice – and both orgonite pieces cracked horribly! It just generates too much heat, lol. The pyramid mould is only about 100mm high, though. I’m a bit rushed for time right now (preparing for 2 holistic fairs over the next 10 days) but I’d like to find a long cone mould as soon as possible.
    So… once again thank you for this forum, and thanks to all members that have contributed.
    User avatar
    MariaT
    Posts: 12
    Joined: Thu Jul 01, 2010 3:50 am
    Location: Cape Town

    Re: Plaster orgonite

    Postby Spirit Walker on Thu Jul 01, 2010 9:45 pm

    Just a couple of the latest test casts from various “molds”… :)
    You do not have the required permissions to view the files attached to this post.
    Spirit Walker
    Posts: 41
    Joined: Fri May 28, 2010 9:43 pm

    Re: Plaster orgonite

    Postby Spirit Walker on Thu Jul 01, 2010 9:47 pm

    IMG_0010.JPG
    You do not have the required permissions to view the files attached to this post.
    Spirit Walker
    Posts: 41
    Joined: Fri May 28, 2010 9:43 pm

    Re: Plaster orgonite

    Postby Spirit Walker on Thu Jul 01, 2010 9:48 pm

    IMG_0011.JPG
    You do not have the required permissions to view the files attached to this post.
    Spirit Walker
    Posts: 41
    Joined: Fri May 28, 2010 9:43 pm

    Re: Plaster orgonite

    Postby Spirit Walker on Thu Jul 01, 2010 9:58 pm

    I just handed these individually to my daughter after taking the photos, and her expressions and comments were priceless. Starting with smallest, her eyes got huge and she immediately said shocks in her hand. With second bowl piece, a vibration and a look of confusion. The third largest, amazement, and she gushed and blushed, said Wow. hole body got warm. :) Will share mix ingredients, with Josh’s permission, later to any who wish… All pieces are unusually “cold” when holding, almost like putting your hand against a cool marble wall at a fancy hotel. The largest piece is the coldest, done right chilly to hold. I stacked them from smallest to largest, and there was 3 loud knocks on the wall immediately after ward, within a split second, right next to me on the bed. I jumped. Took the top piece off, felt the air pressure in room change. Put it back on, heard the 3 knocks again!!! I tried to take a picture of it, my camera batteries went dead. Replaced them, snapped the pic, camera shut off! Retried four times, same thing happened. Fifth time checked battery level, almost exhausted. New batteries out of the pack… :) Too funny. So no pics of stack, but I promise it was entertaining!
    Aho!
    Tony
    Spirit Walker
    Posts: 41
    Joined: Fri May 28, 2010 9:43 pm
    #165
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby josh on Thu Jul 01, 2010 10:29 pm

    Hello Maria T
    Here come the rescue :D ., we have been experimenting with different ingredients for the Plasterite in going further into simplifying the mixture, so here we are with a new formula that according to some very sensitive people is outstanding: mix your plaster with some beach sand, the proportions are in volume 4 liters of plaster for 350ml of sand. If your sand comes from a beautiful Cape Town beach nothing else to do If you have to buy your sand which would probably be washed then you will have to add some unrefined sea salt :-) to dissolve in the water you will use for the plaster. You might want to have 4lb of salt for 25 lb of plaster . You may add any crystals you want according to what you want to achieve with your piece for this particular event. Any shape will do (does not have to be a pyramid, actually better if not – old energy -). We are using all sorts of conical molds/glasses, vases, cooking molds, cake molds. We have posted all sorts of different shape and form for you to look at :) viewtopic.php?f=2&t=6&st=0&sk=t&sd=a&start=30
    And this is what we have found to work the best for releasing the devices from the molds: wax your molds with just any car wax, then spray with silicon or any professional release agent (made with parafin), we have used a product call Pam (canola oil…not good) and does not result in the smooth surface, do not be fooled by this so ordinary plaster stuff it really works regardless what any pajama people are saying
    j
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby josh on Thu Jul 01, 2010 10:48 pm

    Please Tony, share with everyone say it the way it is :o :o I promess you will not be banned :lol: :lol:
    j
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby Spirit Walker on Thu Jul 01, 2010 11:11 pm

    If you insist… LOL :) Aho Brother!!! :)
    So the pictured new mix is sans any crushed metal or crushed crystal. New mix is plaster, charged water (3 minutes in blender on high, w/rare earth mags opposite each other, source bottled spring water), store bought sand (from Michaels Craft), some sea salt, and clear quartz crystal in center of each piece, surrounded by four smaller quartz crystals in each direction, all facing same direction, on same center level, and pinches of several powdered resins from myrrh, frankincense, amber, and dragons blood. All to boost protection and well being. Tap water, here in Maryland, turns yellowish color after 3 minutes in blender, and changed the color of my 1st and 2nd batches. Last batch was bottled spring water spun up, no color change but “thickness” did alter it seemed. Mixing all together was a delightful mess, still have stains on carpet to clean up. Now that I’ve started to using a very fine grade to sand down the uneven bottoms, I’ve discovered even more ways to get plaster on everything I own! LOL :) OH Well. Big Note: This is far more than Josh is putting in his right now, please reference his mix for precise and proper go of it. Mine have a very marbled look to them, son said it looked like concrete with marble thrown in to…
    Plan to have all 3 kids this weekend helping with 5th batch, tomorrow night will do 4th. Next time I see one of those plastic cones in a parking lot….. ;) I really want something huge and heavy… :) Can’t help it, will wrap 144 feet of electrical extension cord and plug in my salt lamp, then just smile and smile…. If my youngest daughter gets as excited as my other two children, I’ll get her to make her own too, to take with her back home. Note to self, make some for “that” home too! :) Not sure if the sudden change in weather to clear blue skies and almost cool temps is due to anything I made, but it sure does feel better now that the last batch is “live”…. :0
    Aho!
    Tony
    Spirit Walker
    Posts: 41
    Joined: Fri May 28, 2010 9:43 pm

    Re: Plaster orgonite

    Postby MariaT on Fri Jul 02, 2010 6:39 am

    josh wrote:Hello Maria T
    Here come the rescue :D ., we have been experimenting with different ingredients for the Plasterite in going further into simplifying the mixture, so here we are with a new formula that according to some very sensitive people is outstanding: mix your plaster with some beach sand, the proportions are in volume 4 liters of plaster for 350ml of sand. If your sand comes from a beautiful Cape Town beach nothing else to do If you have to buy your sand which would probably be washed then you will have to add some unrefined sea salt :-) to dissolve in the water you will use for the plaster. You might want to have 4lb of salt for 25 lb of plaster . You may add any crystals you want according to what you want to achieve with your piece for this particular event. Any shape will do (does not have to be a pyramid, actually better if not – old energy -). We are using all sorts of conical molds/glasses, vases, cooking molds, cake molds. We have posted all sorts of different shape and form for you to look at :) viewtopic.php?f=2&t=6&st=0&sk=t&sd=a&start=30
    And this is what we have found to work the best for releasing the devices from the molds: wax your molds with just any car wax, then spray with silicon or any professional release agent (made with parafin), we have used a product call Pam (canola oil…not good) and does not result in the smooth surface, do not be fooled by this so ordinary plaster stuff it really works regardless what any pajama people are saying
    j

    Josh, you are a star! I’ll give it a go. For ease of calculation I’ll mix 1 part sand (co-incidentally I have some Cape Town beach sand!) to 11 parts of plaster. I’ve just got back from collecting some copper dust from a woman who bronzes items, so I’ll add a pinch of that together with the 5 quartz crystals and some chips of other crystals.
    I’ll let you know how it turns out.

    User avatar
    MariaT
    Posts: 12
    Joined: Thu Jul 01, 2010 3:50 am
    Location: Cape Town

    Re: Plaster orgonite

    Postby nepenthe on Fri Jul 02, 2010 5:22 pm

    Hi Josh thanks for starting this great topic. I’m getting ready to go shopping for the ingredients of my first attempt at making orgonite, (never made the resin, so this is a real first) and going down your list – apart from the large crystal, how much crushed crystal does one need, or can it be eliminated?
    And is copper powder required – how much in proportion to the mold? Don’t know any machine shops near me where I can get these, can you buy them at a hardware shop or craft shop – (if I don’t want to go online, getting impatient). If I can’t get powder, can I use something else?
    And what are oxides, sorry, these are strictly orgonite for dummies questions. :|
    Isabelle
    nepenthe
    Posts: 3
    Joined: Wed Jun 30, 2010 2:47 pm

    Re: Plaster orgonite

    Postby josh on Fri Jul 02, 2010 9:20 pm

    Isabelle As soon as you make a few of these you will be an expert :D
    Alright, for the regular Orgonite:
    Two kind of matrix, one is the polyester resin, and the other is epoxy resin, one (the polyester smell terrible and is toxic) the second (epoxy) do not smell
    The price of the two is about the same from US composites, except for the really inexpensive polyester resin that is roughly $25 per gal. as the other polyesters and epoxy are in the same price range 34 to 38 per gallon, when you buy a greater quantity they wont charge you as much, I just got 10 gal of epoxy : one to one ratio thick epoxy#150 for $278, that makes it $27 per gallon, if you get only one gallon it will cost you $38, so considering all factors, I rather use the epoxy.
    For the metals you have many choices, but the smaller the better, any oxides will work especially well, but at this point you must use crushed crystal for thorough dispersion, otherwise a single block crystal is not going to give you the full strength within the device, to get the oxide really cheap go there:
    http://www.ecrater.com/p/3572285/30-lb- … xide-fe3o4
    This is the place where you will find the iron oxide at $1 per pound, and these are the best prices, you can mix with it some metal shavings, no problem, with or without.
    If you are going to do only with the powder, one thing to remember: you will not need that voluminous of a device because with the powder it is quite strong.
    For the proportions, this is what I do, say I am going to make a few pendants; in a small container, such as an old yogurt container, you will put 1/2 a cup to 3/4 cup of resin (mixed) so if you use a one to one ratio of epoxy, you would put in 1/4 cup of one and 1/4 cup of the other, mix them really good before you put in anything else
    Then ad your oxide and your crushed crystals one to one: one Tbsp of oxide, one Tbsp of crushed crystals….two of oxide, two of crystal…. three of oxide……. in other words, equal amount of each, when the mixture is thick and a little difficult to stir, this is when you pour it in the molds.
    For mold to make nice pendants you can use the mini muffin molds, there is 24 small muffins hole in it, so you can pour (with a 1/2 cup resin) about 6, do not fill them or they may be too thick to have hanging around your neck.
    When you do devices with epoxy it is good to always have another container ready to receive your extra resin, like a large cone, and after awhile it will be all filled up then you have another device without wasting anything.
    Are you OK with what to do for lubricating your mold, if not let me know and we shall help with it
    If you can get silicon molds they are the best since you do not have to lubricate them
    Good luck, please ask questions before you get in trouble :oops: :oops: :oops:
    josh
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby nepenthe on Sat Jul 03, 2010 3:21 am

    Thanks for the crash course Josh. I’m planning to start very small so as to save cost and minimize epic failures…. :roll:
    I checked out US Composite and the price of epoxy 1:1 #150 is $64.50 for a single gallon kit and $498 for 10 gallons, quite expensive. Did you buy from them direct?
    I got most of your directions but can you elaborate a bit on the following?

    josh wrote:you will put 1/2 a cup to 3/4 cup of resin (mixed) so if you use a one to one ratio of epoxy, you would put in 1/4 cup of one and 1/4 cup of the other, mix them really good before you put in anything else
    Then ad your oxide and your crushed crystals one to one: one Tbsp of oxide, one Tbsp of crushed crystals….two of oxide, two of crystal…. three of oxide……. in other words, equal amount of each, when the mixture is thick and a little difficult to stir, this is when you pour it in the molds.

    Not sure what you mean by “one to one ratio of epoxy”. Are you describing the 1:1 as in resin:hardener mix? or a layering process, say 1/4 cup of resin/hardener+oxide to 1/4 cup of resin/hardener+crushed crystals, then when they start to thicken, pouring both in the mold one at a time?
    This may sound nutty but I was thinking of making muffin size regular orgonite with the epoxy and another set using separate muffin molds for the plaster version since the hardening time is different. And hopefully be able to compare the vibes of epoxy to plaster. Do I use the same proportion of crushed crystal, metal shavings, and oxides for the plaster orgonite as for the epoxy one?
    Isabelle
    BTW, I have a friend who was given a TB cast-off by a local maker which gave him one of the worst nightmares of his life and has been very suspicious of orgonite ever since. The thing looked harmless enough but I guess it was a very bad mix. Yikes. :o

    nepenthe
    Posts: 3
    Joined: Wed Jun 30, 2010 2:47 pm

    Re: Plaster orgonite

    Postby nepipemi on Sat Jul 03, 2010 7:36 am

    Hi Isabelle,
    Welcome!
    At US Composites, you can use the EB polyester resin which is cheaper. It is a brownish green resin. By the time you pay shipping on 1 gallon, you could have paid the same amount at Autozone or Walmart for their Bondo brand resin. They work just the same but the EB resin is a bit higher quality meaning a touch easier to work with. With poly resin, you use a liquid MEKP catalyst that is measured in drops.
    Josh has also had good luck with epoxy which is what he was describing. The catalyst for epoxy is a thick liquid and mixes in like a 1:2 ratio or something like that. He’s the expert there.

    This may sound nutty but I was thinking of making muffin size regular orgonite with the epoxy and another set using separate muffin molds for the plaster version since the hardening time is different. And hopefully be able to compare the vibes of epoxy to plaster.

    I think this is a stellar idea. The plaster concept is relatively new and it is exciting to hear people’s response in a side by side comparison.

    BTW, I have a friend who was given a TB cast-off by a local maker which gave him one of the worst nightmares of his life and has been very suspicious of orgonite ever since. The thing looked harmless enough but I guess it was a very bad mix. Yikes. :o

    It is possible that it wasn’t bad orgonite but that he had not acclimated to the piece yet.
    Best regards to you!
    Nepi

    nepipemi
    Posts: 45
    Joined: Sat May 29, 2010 3:35 am

    Re: Plaster orgonite

    Postby josh on Sat Jul 03, 2010 8:21 am

    Hello Nepi good morning and good morning Isabelle
    The price that you have looked at is correct except that when it quoted the price for one gallon; it is one gallon of each, hardener and epoxy, so you would get 2 gallons for that price, the same for the 10 gal deal, you would get 20 gallons for that price ($ 498), this is the kind of epoxy where the amount of hardener and epoxy are the same.
    Mixing the epoxy, measure equal amount of hardener and epoxy (one to one ratio)
    Mix thoroughly
    Ad your oxide and crushed crystals
    When it is thick pour it in the molds
    One of the benefit that I find with this (one to one thick epoxy 150) is that it gives me a long time to work, because according to the temperature it will take 8 to 12 hours to harden, Some of the polyester resin will harden within a half hour
    For the plaster you use only some crushed crystal, plaster and water, no metal ( or just a pinch of copper powder but not no necessary)and it will harden within a half hour
    For the Orgonite you use resin, metal and crystal
    Hope this is of help
    josh
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby sacred on Sun Jul 04, 2010 11:44 pm

    now for another newbie’s question … are these charged after they’re made, or is it the combo of what they’re made of that has the charge?
    User avatar
    sacred
    Posts: 86
    Joined: Sat Jun 26, 2010 9:44 pm
    #166
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby josh on Mon Jul 05, 2010 12:35 pm

    Hello Sacred
    You can charge your devices as they are hardening to sit whatever intentions you like, or frequencies, or sounds, but as you work with the Orgonite you find a degree of consciousness in it that quite unusual: it will respond to your intents, for example if you find yourself in a situation where you need a lot of Orgonite and you do not have enough with you, may be just one piece, you can ask the Orgonite to link it self with of the other Orgonites creations in the world and you will have just that , you see they are all connected in a real way, as well you can ask your Orgonite to turn it self off and it will do that, so you have with the Orgonite a device that is very conscious on many levels
    j
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby MariaT on Mon Jul 05, 2010 4:03 pm

    Help, please. I’ve made 2 plasterite items – a pyramid and a larger piece in a glass vase about 19cm (7.5in) high. The good news… the pyramid demoulded quite easily. The bad news? I cannot get the plasterite out of the vase which has cracked despite being made of quite thick glass. Any suggestions?

    05jul10vase.jpg
    05jul10pyramid.jpg

    I’d also appreciate some feedback on the energy put out by my creations – as yet I do not feel the energy.

    You do not have the required permissions to view the files attached to this post.
    User avatar
    MariaT
    Posts: 12
    Joined: Thu Jul 01, 2010 3:50 am
    Location: Cape Town

    Re: Plaster orgonite

    Postby sacred on Mon Jul 05, 2010 6:06 pm

    MariaT wrote:The bad news? I cannot get the plasterite out of the vase which has cracked despite being made of quite thick glass. Any suggestions?

    Maria, I’m new to orgonite myself, but thought I’d share (if it hasn’t already been mentioned, and you may already know :oops: ) that as plaster hardens it gets very hot, so I’m not surprised the thick glass has broken. I used to make plaster molds for ceramics, so came across that then. Maybe if any thick glass molds were heated, they wouldn’t crack so easily? In making molds (for ceramics), I’d put the plaster on the outside of the item, not inside as in making plasterite orgonite, so I didn’t have the expansion issue that seems to be happening.
    this information may be extremely useless … hope not, though …
    I like the energy of the one that is out of the mold … it feels clear and clearing …
    & thanks, Josh, for your reply to my question .. :)

    Last edited by sacred on Mon Jul 05, 2010 7:46 pm, edited 1 time in total.
    User avatar
    sacred
    Posts: 86
    Joined: Sat Jun 26, 2010 9:44 pm

    Re: Plaster orgonite

    Postby josh on Mon Jul 05, 2010 7:40 pm

    Steve to the rescue please :D , tell those beautiful people an energy reading on the devices
    Maria T, I am have the same problem with the glasses (vases) that I have been using 4 out of 5 have cracked with the plaster inside, for yours it will be easy to undo, just make sure to ware GLOVES, the chard are long and sharp, you may have to give the glass a little help the a blunt object :D
    And your creations are beautiful, can you see how easy it could be for the children to do
    Good work
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby Spirit Walker on Mon Jul 05, 2010 9:16 pm

    Those are gorgeous!!! Truly!!! I too have broken one glass mold, uh, make that three, now that I count truly… lol :) One large one. I got one creation out of the mold, I’m using it to charge a bottle of water right now…. :) I’m not sure what my final product may look or feel like, but I just tried using my first plasterite charged water in creating a new batch. I am going to buy some turtle car wax or such shortly and tippy toe into using a glass piece as a mold. The short 4 ounce glass I used in my first try was a perfect size of sorts, and it shattered that glass quite easily. Oh well. :) Plastic bowls from the dollar store seem to be working well too, don’t require any release agent it seems.
    Just in playing with finished pieces, I can really “feel” the energy expand when 2 or more pieces are brought together, often feeling that change of pressure in a room sensation, ears popping or closing. I had three stacked and it was incredible to feel how strong that was, and it was intense. This is fun, easy, cheap, and hasn’t been cluttered with big definitions yet. I could see a slightly yellowish thickness to the water I sat on a piece for 2 days, that I used in making these latest pieces that are drying. So testing just what this new form called plasterite and discovering it usages is unlimited as well.
    That pyramid piece really rocks. What I found helps in sensing the energy is the brisk hand rub first, then the push/pull with palms facing, until you can sense your own energy field easily. Once that is done, just slow passes above the piece should give you a pressure or “something” to key in on. Once you find shell/field, you can tune in with hand or intention, and check out what is coming from it, on a personal visceral level with your energy body. Thanks for sharing! :)
    Tony
    Spirit Walker
    Posts: 41
    Joined: Fri May 28, 2010 9:43 pm

    Re: Plaster orgonite

    Postby Steve on Mon Jul 05, 2010 10:03 pm

    Hi MariaT,
    On the vase 142,000 Bovis and the pyramid about 75,000 Bovis. This compares very favorably to orgonite pieces in the same size range. The most important thing though is for you to try sensing the energy from the pieces you make. Try to get as quiet/meditiative as you can internally and then place both hands around the piece and see if you can pick up a little buzz in your hands from them.
    Blessings
    Steve
    Steve
    Posts: 33
    Joined: Tue Jun 01, 2010 1:58 pm

    Re: Plaster orgonite

    Postby monsoon gecko on Tue Jul 06, 2010 12:56 am

    WOW Maria, That pyramid photo has a glow..an aura around it’s apex. Nice one.!
    Luckily, none of my glass moulds have cracked yet..touch wood ..ha
    Today, just finish pouring giant traffic cone plaster orgonite…almost a metre tall !
    Found it sitting on the side of the road…..bonus !
    It took just over 20 kg bag of plaster and contained many asscention stones… < the synergy
    of twelve from the Book of Stones by Robert Simmons and Naisha Ahsian > in the first 1/3.
    Originally purchased < expensive collection indeed ! > for orgonite but never felt motivated
    to use till now. Also included 5 large lemurians and a large Aussie smokey quartz, plus a mix
    many small gems / crystals as from previous post. Also some local beach sand and copper
    powder. Can hardly wait to unvail tonight or tomorrow morning….still hot.
    Have photo documented materials and stages to share via photobucket at later date.
    Hey Josh…this time didn’t have the heart to crush any crystals…this one seemed special ,
    even though I got the Rescue Remedy from Sacred.
    Maybe next time …..Regards all. Yo
    monsoon gecko
    Posts: 102
    Joined: Fri May 28, 2010 1:49 am

    Re: Plaster orgonite

    Postby MariaT on Tue Jul 06, 2010 1:35 am

    Thanks, you guys, for your comments, help and advice. Very encouraging. I must say plaster is certainly easier and more pleasant to work with compared to polyester resin, which is what I use for my orgonite pieces.
    So… nothing for it but to break open the vase? Hmmm… wish me luck.
    I did take Josh’s advice and used car wax and a silicon spray but obviously not enough, lol.
    User avatar
    MariaT
    Posts: 12
    Joined: Thu Jul 01, 2010 3:50 am
    Location: Cape Town

    Re: Plaster orgonite

    Postby josh on Tue Jul 06, 2010 7:14 am

    I also Maria use much wax and release agent buy they broke anyway.
    Looking forward to see the cone pictures :o :o :o :o , My cone is being painted :D , in a day or so I should be able to take pictures
    josh
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby Spirit Walker on Tue Jul 06, 2010 8:11 am

    Good point Monsoon!!! I meant to mention it myself, but if you look at the apex of that pyramid…… I see glow!!!! Can touch my finger to “it” and really get a jolt!!!! Way to go Maria, it came out gorgeous and functional!!! :)
    Tony
    Spirit Walker
    Posts: 41
    Joined: Fri May 28, 2010 9:43 pm
    #167
    AvatarEK
    Keymaster

    Re: Plaster orgonite

    Postby MariaT on Tue Jul 06, 2010 12:30 pm

    Josh, do you mind if I post a pic of a resin orgonite pyramid (it cracked lol) that I poured a couple of weeks ago. It’s the same size as the plasterite pyramid and I’d love Steve to do a reading on it.
    User avatar
    MariaT
    Posts: 12
    Joined: Thu Jul 01, 2010 3:50 am
    Location: Cape Town

    Re: Plaster orgonite

    Postby josh on Tue Jul 06, 2010 12:38 pm

    Maria T, this is why this forum is here, please post all of the pictures you want to, we are all looking forward to see your creation, thanks a bunch
    josh
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby MariaT on Tue Jul 06, 2010 2:43 pm

    Thanks, Josh. I only asked because this thread is about plaster orgonite and the pic is of resin orgonite. The ‘golden’ pyramid was made using the same mould as the one I used for the plasterite pyramid, and is 85mm high.

    06jul10goldenpyramidL.jpg

    Josh, offer me a hand, and I’ll take your whole darn arm. I’m also attaching a pic of three smaller resin pyramids – the heights are around 65mm, 40mm and 25mm.

    06jul103pyramids.jpg

    Steve, I’d appreciate a reading of the orgonite pieces. Many thanks.

    You do not have the required permissions to view the files attached to this post.
    User avatar
    MariaT
    Posts: 12
    Joined: Thu Jul 01, 2010 3:50 am
    Location: Cape Town

    Re: Plaster orgonite

    Postby Steve on Tue Jul 06, 2010 2:49 pm

    Hi Maria,
    Large Pyramid 78,000
    Med 47,000
    Small 32,000
    Steve
    Steve
    Posts: 33
    Joined: Tue Jun 01, 2010 1:58 pm

    Re: Plaster orgonite

    Postby josh on Tue Jul 06, 2010 2:58 pm

    Hello Maria T, excellent work, And let us not forget, this is not only for Plasterite, it is for any and all devices that have any chances of helping in undoing the nefarious order: Orgonite, Plasterite, sweat lodges, prayers, any medicine that will bring on more light you are welcome to use and post and share, and if you find something new please let us know, Again Thank you Maria good pictures of good devices
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm

    Re: Plaster orgonite

    Postby Steve on Tue Jul 06, 2010 3:25 pm

    On that note Josh I will share a bit about my main focus which is remote/distant energy healing. If any of you have pain emotional or physical and want to get rid of it this is my specialty. I offer 10min free phone sessions to everyone who asks, generous with my time, and very high success rate.
    Blessings
    Steve
    http://www.stevelevine.webs.com for more
    Steve
    Posts: 33
    Joined: Tue Jun 01, 2010 1:58 pm

    Re: Plaster orgonite

    Postby MariaT on Tue Jul 06, 2010 3:38 pm

    Thanks, Josh, for your encouragement.
    And thanks, Steve, for the readings. Just one thing, I actually posted pics of 4 different sized pyramids (1 brass & 3 aluminium) and you gave me figures for three. Was the little truncated blue pyramid omitted?
    Maria
    User avatar
    MariaT
    Posts: 12
    Joined: Thu Jul 01, 2010 3:50 am
    Location: Cape Town

    Re: Plaster orgonite

    Postby Steve on Tue Jul 06, 2010 3:46 pm

    86,000 on the first one you posted Maria.
    S
    Steve
    Posts: 33
    Joined: Tue Jun 01, 2010 1:58 pm

    Re: Plaster orgonite

    Postby MariaT on Tue Jul 06, 2010 4:40 pm

    Thanks, Steve. It’s gratifying to get feedback.
    Maria
    User avatar
    MariaT
    Posts: 12
    Joined: Thu Jul 01, 2010 3:50 am
    Location: Cape Town

    Re: Plaster orgonite

    Postby josh on Tue Jul 06, 2010 10:40 pm

    Hello….here are new painted Plasterite….Enjoy :D :D :D :D
    The large cone is 27″ tall and is called The Beacon :)
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    Image
    josh
    Posts: 194
    Joined: Thu May 27, 2010 7:10 pm
Viewing 10 posts - 1 through 10 (of 24 total)
  • You must be logged in to reply to this topic.
Life Force Energy