Life Force Energy 4

Plaster orgonite

 

A forum for sharing ideas on creating a better world. 280 posts • Page 26 of 28 • 1 … 23, 24, 25, 26, 27, 28

 

Re: Plaster orgonite

 

by josh » Sun Oct 16, 2011 5:48 am Hello Renjit

First, Plasterite and Orgonite are two very different animals, they do not work on the same principal;

 

Orgonite function more as capacitor than as a piezo electric from the compression of the crystal by the resin, I think that this compression story is just that: a story trying to think of a

 

way the Orgonite is working and not knowing.

 

The Orgonite is a static condenser (works by itself), the metal accumulate a charge from existing environmental EMF, get saturated, brings all the energy to zero point and broadcast it back as Chi, and do it again and again, but only to a point, many of us have seen where the Orgonite was not working at all where EMF were very strong, such as an “smart meter” or living too close to a cell phone tower.

Don Croft explained some 10 years ago that the towers were only working at 15% capacity, that may be true and that may be why the Orgonite is working around the towers, but if and when they turn those towers to 100%, I dont think the Orgonite will be doing too much.

 

The Plasterite works on a much higher frequency, likely involving all true colors of the spectrum, it necessitate no metal only plaster and crystals or quartz sand, it produces energy that not all people can feel, but it nevertheless will clean up the sky and do much more, beside being inexpensive, it is easy to work with, but I am not pushing anyone to do Plasterite, just know that most of the Orgonite groupies will not look kindly if you do

 

You can see from the posts on this forum the many success stories that the people are having with Plasterite, make some and see for yourself what results you are getting

 

The Plasterite has such a fine frequency, that I would not want to mix the two, both are valid, but not in the same soup

Hope this help a little

 

Josh

josh

 

 

 

 

Top

Posts: 276

Joined: Fri May 28, 2010 12:10 am

 

 

 

Re: Plaster orgonite

 

by Edostar » Sun Oct 16, 2011 6:52 am

 

Hi Josh.

 

I agree than Plasterite and Orgonite are two quite different things and that for a long time; nobody had the faintest idea how Orgonite worked.

 

Orgonite is actually an Inductor and not a Capacitor at all.

It simply drains off the ambient ElectroMagnetic Radiation (as you point out) and concentrates it.

 

The crystal component in Orgonite is there to convert the accumulated current (EMR) into heat through ‘Electrostriction’ which is a property shared by many crystal materials (as is its converse; the Piezoelectric effect).

 

Orgonite with no crystal at all (as with Karl Welz’s version) does work but very weakly (or slowly if you prefer).

It converts the EMR into heat simply due to its concentration inside the Inductor matrix.

 

So if Orgonite doesn’t convert DOR into POR; where does the Positive ORgone in the area of an Orgonite device come from?

 

The natural polarity of the Etheric Field is a positive one.

This positive field is responsible for the existence and continuing good health of all life on Earth.

For this reason; all living things begin to fall ill when the etheric field is disrupted and turns negative (by the introduction of EMR for instance).

 

When our Orgonite drains off the EMR; the negative influence on the ehteric field is removed and it returns to its positive state.

This gives the understandable but mistaken impression that Orgonite is directly converting DOR into POR.

 

See: ‘How Orgonite Works’.  http://www.baligifter.org/blog/uncatego … nite-works

 

I’m afraid that these comments are a little misplaced in a Plasterite thread but I felt that they might be helpful in the circumstances.

 

Although I have conducted a series of experiments into Orgonite (which resulted in determining the above) I have done no such experimentation into Plasterite.

 

All the best.

 

Dan.

http://www.baligifter.org

 

 

 

 

 

Edostar

 

 

 

 

 

Top

Posts: 82

Joined: Thu Dec 23, 2010 7:20 pm

Location: Bali Indonesia

 

 

 

Re: Plaster orgonite

 

by josh » Sun Oct 16, 2011 12:41 pm

 

Wow! Thank you Dan, I was working under the wrong premisses, addressing Orgonite as a condenser, I really appreciate you taking the effort to put our feet on the right path, I feel that

 

the more I learn and the more I see how much I do not know

 

Therefore the Orgonite is an “Etheric Cleaner” returning the Etheric field to normalcy , But as you may have seen, when the EMF are too strong, the Orgonite is not enough, may be it become over saturated and can no longer create the changes, even large amount of Orgonite do not appear to help, I have not experience what the Plasterite does under heavy EMF, I will have to send some to one of my customer that is severely affected with the “smart meter” device, and see How she feel with it.

 

Again thank you Dan, Bali is certainly a seat of great wisdom Josh

josh

 

 

 

 

Top

Posts: 276

Joined: Fri May 28, 2010 12:10 am

 

 

 

Re: Plaster orgonite

 

by renjit8650 » Sun Oct 16, 2011 1:03 pm

 

Dear Josh,

I am standing with you in the same boat as a late comer, but in the correct direction it seems.

 

Re: Plaster orgonite

 

by josh » Thu Jul 22, 2010 12:33 am

Nepi, we are going somewhere!!!!, I really like the design that you made on the top of that cone.

The correct mixture for plaster: Two plaster to one and one half water: 2 gallons plaster + 1 1/2 gallon water, mix quickly and pour quickly as well, it will start to harden within a few minutes.

Your next assignment : an extra large traffic cone

One 25lb bag of plaster, that should be about 4 gallons (plus or minus a little) 3 Gallons of water

Heavy on the sand (about 6 or seven cups), less if you like

A bunch of any stones that you like (3 or more hand full), less if you like Some larger crystals, 5 like in a HHG

Pour the thing in 2 batches, 3 if it is toooo hard to stir, just pout the next batch on the top of the last

Dont forget to tape shut the end of the traffic cone

OK ….you have 10 minutes to completion…………….we are waiting for the picture…. Josh

 

I am planning an extra large traffic cone as advised by you to Nepi.

Kindly confirm the components above, or any changes after that, or any additions to this like coils etc to increase the power.

Thanks Renjit

 

renjit8650

 

 

 

 

Top

Posts: 20

Joined: Sat Oct 15, 2011 10:56 am

 

 

 

Re: Plaster orgonite

 

by Edostar » Sun Oct 16, 2011 8:49 pm

 

Hi Josh.

 

Your analogy of Orgonite as an ‘etheric cleanser’ is a good one.

Filters can become overwhelmed by the sheer quantity of dirt to be removed before cleanliness is achieved and there must be a limit to how much EMR can be neutralized by any one piece of orgonite.

 

Another factor is the frequency range of the EMR being neutralized.

My first pieces of orgonite were made with cut-up stainless steel scrubbing pads and they definitely worked but not very well.

I think that this was due to the fact that the spirals were far too uniform in size, shape and thickness.

 

Better is the wide range of shapes and sizes of metal shavings that one gets from machine- shop swarf.

Each different size, shape and thickness (and even metal type) will induct EMR of a different frequency and with varying levels of efficiency so the wider the range of sizes and shapes the better.

The scrubbing pad orgonite was probably neutralizing a narrow range of EMR frequencies very well but to the exclusion of all the other frequencies.

 

These technical considerations are essential to making efficient orgonite but lack the magical (even mystical) aspects so often associated with orgonite and the profound effects of detailed changes in the etheric field.

These extraordinary effects are not denied in the quest for technical efficiency; they simply operate parallel to the technical considerations involved in EMR removal.

 

When the etheric field is restored efficiently to its positive state by our little inductor/converter matrix; a powerful area of POR exists around the orgonite.

This POR field amplifies the effects of specific stones and stone combinations and can be channeled by the use of coils and terminated crystals.

These elements are not essential for the neutralization of the EMR and the restoration of the positive etheric field but they can enhance it very strongly and in magical and mysterious ways.

 

This area of etheric research is still wide open and cannot be addressed in purely technical terms.

It will continue to require the essential feedback from energy-sensitives that it alway has.

 

In the absence of a technical understanding of what Plasterite is doing; energy-sensitives will be needed here too.

 

All the best.

 

Dan.

http://www.baligifter.org

 

 

 

 

 

Edostar

 

 

 

 

 

Top

Posts: 82

Joined: Thu Dec 23, 2010 7:20 pm

Location: Bali Indonesia

 

 

 

Re: Plaster orgonite

 

by josh » Mon Oct 17, 2011 6:10 pm

 

Hello Renjit

Yes the mix for the Plasterite is correct, of late I have been mixing only quartz sand in the mix and it seems to work as well, as well as Orgonite the quartz sand has been one of my ingredient in it: the energies are good.

 

It has been one of my effort to trust Nature to give me what is needed to accomplish the goal of purification of energies in the environment, so all is becoming more and more simplified, for over a year now, I have been working with the hats of acorns, I found them to be natural amplifiers, I have made some devices with Orgonite, Plasterite, Pillows with as much acorn hats that I could put in, and found the broadcasting much improved, I am certain there are much surrounding each of us that could be used for the work we are doing.

 

Josh

josh

 

 

 

 

Top

Posts: 276

Joined: Fri May 28, 2010 12:10 am

 

 

 

Re: Plaster orgonite

 

by monsoon gecko » Wed Oct 19, 2011 4:44 am

 

G;day again, I figured as I’d be away for a while, it would be nice to let a couple of my big pieces off the leash outside, instead of being wasted in my metal shed, but needed weatherproofing.. So set up the radionics plates, with a cone on top and liberally painted the

 

outer layer with a couple of layers of resin.

 

 

This piece had alternate layers, the thinner ones loaded with paramagnetic rock chips, the thicker disks each had a triangle of quartz points plus beach sand.

Iv’e posted more detail before, but the unit felt quite happy out in the sunshine .

The next piece was the first extra-large cone…( see previous post ) and was loaded with high energy , synergy of 12 combo in the top third ( from the Book of Stones )

  • lso had a huge quartz point in the centre , seashells , a few other goodie plus some copper Wasn’t aware of the bonus of sand in those days. As soon as the resin hit the plaster, it turned green, due to the copper powder. …mmm, I thought…camoflague ? Anyway , it got two seperate coats of resin and has found a home sitting in a pretty rockery, surrounded by seashells , picture rocks and lush plants next to the family pool. Before I placed it, I sat it next to the owner and said put your hand on this and tell me what you feel. She immmediately picked up the deep vibration…so much more than a tingle of holding an orgonite.. Well , I think it too will be happier now, working with the elementals and charging the area.

 

 

 

 

Cheers…..enjoy

monsoon gecko

 

 

 

 

Top

Posts: 219

Joined: Fri May 28, 2010 6:49 am

 

 

 

Re: Plaster orgonite

 

by renjit8650 » Wed Oct 19, 2011 11:44 am

 

Dear Monsoon, Good done.

Can we conclude that the 2 top coats of resin increases the durability of plasterite in addition to the increase of the broadcasting strength and the POR output level

Best Regards Renjit. renjit8650

 

Posts: 20

Joined: Sat Oct 15, 2011 10:56 am

 

Top

 

 

Re: Plaster orgonite

 

by josh » Wed Oct 19, 2011 1:31 pm

 

Stephen my friend, that’s the way to go, love that radionic one, I am certain not to many chemtrails staying are in your area

Have you return home from your trip?

Josh

josh

 

 

 

 

Top

Posts: 276

Joined: Fri May 28, 2010 12:10 am

 

 

 

Re: Plaster orgonite

 

by monsoon gecko » Wed Oct 19, 2011 10:00 pm

 

Good one guys… a coat or two of resin certainly makes these beauties weather proof..Painted the same cone on the radiaonic plates last year and sat it on a wire bench. Didn’t coat the base.. Well it sat out there for months…right through cyclone Carlos and rest of dry season…brought it inside one night to check it out…a little wear on the base, the rest fine and boy was it buzzing when held… reckon they like being in the sun.

Josh, not going back for some time.. staying at mates place for month or 2 then visiting parents and gifting along the way…same place as I wrote in email..

Very extended holiday…have a good look around… options open…. will have to pump out a few more Tb’s…near ran out of milk crate full….all good

Enjoy

monsoon gecko

 

 

 

 

Top

 

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Life Force Energy